ABOUT

Our Variable Frequency Drive (VFD) Power Units are ready for your process control and mobile applications. Dependable, precise variable flow control, less heat and energy saving. Coupling a power unit with a VFD is only a step in the right direction. The percentage of energy savings recorded can significantly reduce your consumption and help you focus on other needs.

TYPICAL APPLICATIONS

  • On-site Machining
  • Line Boring
  • Portable Boring
  • Shovel & Drag Line Repair
  • Large Pipe Prep
  • Conveyors
  • Presses

STANDARD FEATURES

  • 1-100 HP
  • Dependable brands of VFD of your choosing.
  • Changing the motor speed will change the output flow of the hydraulic pump from a minimum to a maximum flow.
  • Minimal hydraulic oil temperature rise developed from power-unit.
  • UL/cUL controls available
  • Custom controls if required.

SPECIFICATIONS

  • Frame: Powder-coated finish
  • Current Draw: 48 AMPS
  • Oil Capacity: 30 gallons AW32 or AW46
  • Pressure: Factory set at 1800 PSI
  • Hydraulic Flow: 6.36 GPM to 28 GPM
  • Hydraulic Pressure: 2500 PSI
  • Operating Temp: 110°F / 43.3°C – 175°F / 79.4°C
  • Sound Level: 62 dB at full flow and operation (reading taken in normal shop surroundings)
  • Electrical: UL/CUL listed NEMA 4 electrical controls – 440, 460, 480, VAC input power (50/60 hz 3-phase) (460 standard)
  • Input Power: 380, 460, 480 VAC Input Power (50/60 hz 3-phase) (460 standard)
  • Light Indicator: Over Temp. / Low Oil Light
  • Pendant: Pendant cable of 12 ft plus 50 ft. extension
  • Wheel/Base: Removable mobile base with nonmarring casters
  • Lifting System: 5 point lifting system
  • Filter: 10 Micron
  • Heat Exchanger: 24 VDC fan with digital read out
  • Gear Pump: Helical cut ultra quiet hydraulic gear pump
  • Dimensions:
    46.5” H x 25” W x 34” L w/o Base
    52.5” H x 26” W x 34.5” L w/ Base
  • Weight: 850 lbs with oil & mobile base